固件更新#

重要

更新可能导致数据丢失,所以要确保你启用了适当的备份登录方法,并/或确保Nitrokey Start不是你的应用程序/服务的唯一认证/2FA方式。

重要

在更新过程中,千万不要断开Nitrokey 3的连接或中止进程,这很可能会使你的设备失去作用。

更新Nitrokey Start固件的步骤如下。

  1. First install pynitrokey. For this you need an Internet connection.

  2. 连接你的Nitrokey Start并验证其识别。

    $ nitropy start list
          *** Nitrokey tool for Nitrokey FIDO2 & Nitrokey Start
          :: 'Nitrokey Start' keys:
          FSIJ-1.2.15-87042524: Nitrokey Nitrokey Start (RTM.8)
    
  3. 开始更新过程。为此,你需要一个互联网连接。

    $ nitropy start update
    
  4. 然后你将被要求输入你的Nitrokey启动的管理密码。(默认密码:12345678)

    *** Nitrokey tool for Nitrokey FIDO2 & Nitrokey Start
    Nitrokey Start firmware update tool
    Platform: Linux-5.3.0-59-generic-x86_64-with-Ubuntu-18 04-bionic
    System: Linux, is_linux: True
    Python: 3.6.9
    Saving run log to: /tmp/nitropy.log.d4erqux4
    Admin password: "your admin PIN"
    
  5. 在 “设备 “下,你可以找到关于你的Nitrokey Start当前版本的信息。在 “请注意 “下的第一项中,你可以看到现有的最新固件版本。现在你必须用 “是 “来确认更新。

    Firmware data to be used:
    
    - FirmwareType.REGNUAL: 4504, hash: ...b'65ac82a1' valid (from ...built/RTM.10/regnual.bin)
    
    - FirmwareType.GNUK: 131072, hash: ...b'f85da8f7' valid (from ...prebuilt/RTM.10/gnuk.bin)
    Currently connected device strings:
    Device:
       Vendor: Nitrokey
    Product: Nitrokey Start
       Serial: FSIJ-1.2.15-43100927
    Revision: RTM.9
       Config: NITROKEY_START:dfu=no:debug=no:pinpad=no:certdo=yes:factory_reset=yes
          Sys: 3.0
    Please note:
    
    - Latest firmware available is: RTM.10 (published: 2020-06-04T12:34:14Z),
    provided firmware: None
    
    - All data will be removed from the device
    
    - Do not interrupt the update process, or the device will not run properly
    
    - Whole process should not take more than 1 minute
    Do you want to continue? [yes/no]: yes
    
  6. 你可以在升级过程完成后检查固件版本。

    $ nitropy start list
    *** Nitrokey tool for Nitrokey FIDO2 & Nitrokey Start
    :: 'Nitrokey Start' keys:
    FSIJ-1.2.15-87042524: Nitrokey Nitrokey Start (RTM.10)