pkcs11-tool

pkcs11-tool is a tool part of the OpenSC project that can be used to manage keys on a PKCS#11 device.

You need to pass the location of the PKCS#11 module to use with the --module option:

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so

Replace /usr/lib/nitrokey/libnethsm_pkcs11.so with the path where the NetHSM PKCS#11 module is located.

You can test if the module is working with the next command:

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --show-info

You should see something like this:

Cryptoki version 2.40
Manufacturer     Nitrokey
Library          Nitrokey PKCS#11 library (ver 0.1)

List Slots

The information about the available slots. The listed slots depend on the configuration of the slots array in the p11nethsm.conf configuration file. To learn more about the configuration of slots, please refer to chapter Configuration.

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --list-slots

Slot 0 (0x0): NetHSM
  token label        : LocalHSM
  token manufacturer : Nitrokey GmbH
  token model        : NetHSM
  token flags        : rng, token initialized, PIN initialized
  hardware version   : 0.1
  firmware version   : 0.1
  serial num         : unknown
  pin min/max        : 0/0

Nota

If your configuration supports more than one slot, you may have to add the --slot <arg> option in pkcs11-tool commands to use the right one.

Key IDs

pkcs11-tool uses an hexadecimal key ID to identify keys. NetHSM uses alphanumerical strings as key ID. NetHSM’s PKCS#11 module uses the raw byte values of the string to form the PKCS#11 ID. You can get the hexadecimal version of a NetHSM key with xxd:

echo -n "MyKey" | xxd -p

4d794b6579

You can then pass this hex value to pkcs11-tool with the --id option.

Generate a Key

Generate a key-pair and store it on the NetHSM.

Nota

The slot you want to use needs to have an andministrator user in the configuration file. Otherwise you will get a CKR_USER_NOT_LOGGED_IN error.

RSA

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --keypairgen --key-type rsa:2048 --label "rsakey"

ECDSA

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --keypairgen --key-type EC:prime256v1 --label "eckey"

AES/Generic

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --keygen --key-type AES:256 --label "aeskey"

Chaves de Lista

List the keys stored on the NetHSM.

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --list-objects

Using slot 0 with a present token (0x0)
Public Key Object; RSA 2048 bits
  label:      rsakey
  ID:         7273616b6579
  Usage:      none
  Access:     none
Private Key Object; RSA
  label:      rsakey
  ID:         7273616b6579
  Usage:      decrypt, sign
  Access:     sensitive, always sensitive, never extractable

Read Keys

Read the public key of a key-pair stored on the NetHSM. It is not possible to read private keys from the NetHSM.

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --read-object --type pubkey --label rsakey --output-file rsakey.pub

The certificate of the key-pair can be read with the same command by changing the --type option to cert.

Nota

The output is in DER format.

Write Keys

Write a private key on the NetHSM. The public key is automatically derived from the private key.

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --write-object rsakey.key --type privkey --id 7273616b6579

The certificate of the key-pair can be written with the same command by changing the --type option to cert.

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --write-object rsakey.crt --type cert --id 7273616b6579

Encrypt

Encryption of data is only supported for AES keys.

echo "NetHSM rulez!  " | pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --encrypt --id 6165736b6579 --mechanism AES_CBC --output-file encrypted.txt

Nota

You have to manually pad the input data to the block size of the AES key.

Decifrar

AES

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --decrypt --id 6165736b6579 --mechanism AES_CBC --input-file encrypted.txt

RSA

You can encrypt data with the public key and decrypt it with the private key.

# get the public key first
pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --read-object --type pubkey --id 7273616b6579 --output-file public.der

# encrypt some data with OpenSSL
echo 'NetHSM rulez!NetHSM rulez!' | openssl pkeyutl -encrypt -pubin -inkey public.der -keyform DER -out data.crypt

pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --decrypt --id 7273616b6579 --mechanism RSA-PKCS --input-file data.crypt

Assine

echo "NetHSM rulez!" | openssl dgst -sha256 -binary |  pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --sign --label rsakey --mechanism RSA-PKCS-PSS --hash-algorithm SHA256 --output-file data.sig --signature-format openssl

To verify the signature with OpenSSL:

# get the public key
pkcs11-tool --module /usr/lib/nitrokey/libnethsm_pkcs11.so --read-object --type pubkey --label rsakey --output-file public.der

echo 'NetHSM rulez!' | openssl dgst -keyform DER -verify public.der -sha256 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:-1 -signature data.sig