Nitrokey Start FAQ#
- Q: Which Operating Systems are supported?
Windows, Linux and macOS.
- Q: What can I use the Nitrokey for?
See the overview of supported use cases.
- Q: What are the default PINs?
User PIN: “123456”
Administrator PIN: “12345678”
We strongly recommend to change these PINs/password to user-chosen values before using the Nitrokey.
- Q: What is the maximum length of the PIN?
Nitrokey uses PINs instead of passwords. The main difference is that the hardware limits the amount of tries to three while a limit doesn’t exist for passwords. Because of this, a short PIN is still secure and there is not need to choose a long and complex PIN.
Nitrokey Storage’s PINs can be up to 20 digits long and can consist of numbers, characters and special characters. Note: When using GnuPG or OpenSC, 32 character long PINs can be used but aren’t supported by Nitrokey App.
- Q: What is the User PIN for?
The user PIN is at least 6-digits long and is used to get access to the contect of the Nitrokey. This is the PIN you will use a lot in every day use e.g. for decrypting messages, for unlocking your encrypted storage (NK Storage only) etc.
The user PIN can have up to 20 digits and other characters (e.g. alphabetic and special characters). But as the user PIN is blocked as soon three wrong PIN attempts were done, it is sufficiently secure to only have a 6 digits PIN. The default PIN is 123456.
- Q: What is the Admin PIN for?
The admin PIN is at least 8-digits long and is used to change contents/settings of the Nitrokey. That is to say after initializing the Nitrokey you probably won’t need this PIN too often (e.g. if you want to add another password to the password safe of the Nitrokey Pro or Nitrokey Storage).
The admin PIN can have up to 20 digits and other characters (e.g. alphabetic and special characters). But as the admin PIN is blocked as soon three wrong PIN attempts were done, it is sufficiently secure to only have 8 digits PIN. The default PIN is 12345678.
- Q: Which drivers/tools can be used?
GnuPG is required for many use cases. It is a command line tool but usually you don’t need to invoke it directly but use another application with user interface.
Don’t use GnuPG in parallel with OpenSC or another PKCS#11 driver because both may interfere and unexpected issues may result.
Install GPG4Win which contains Gnu Privacy Assistant (GPA) and GnuPG (GPG). Start Gnu Privacy Assistant (GPA) or another application such as your email client to use GnuPG. Advanced users could use GnuPG directly (command line). Please note: The Fellowship smart card is similar to the Nitrokey Pro so that this instructions work Nitrokey as well. In general the official documentation is recommended.
- Q: Which algorithms and maximum key length are supported?
See the following table:
Start |
Pro + Storage |
Pro 2 + Storage 2 |
Nitrokey 3 |
HSM |
HSM 2 |
|
rsa1024 |
✓ |
✓ |
✓ |
✓ |
||
rsa2048 |
✓ |
✓ |
✓ |
✓ |
✓ |
✓ |
rsa3072 |
✓ |
✓ |
✓ |
✓ |
||
rsa4096 |
✓ |
✓ |
✓ |
✓ |
||
curve25519 |
✓ |
✓ |
||||
NIST-P 192 |
✓ |
|||||
NIST-P 256 |
✓ |
✓ |
✓ |
✓ |
||
NIST-P 384-521 |
✓ |
✓ |
||||
Brainpool 192 |
✓ |
✓ |
||||
Brainpool 256-320 |
✓ |
✓ |
✓ |
|||
Brainpool 384-521 |
✓ |
✓ |
||||
secp192 |
✓ |
✓ |
||||
secp256 |
✓ |
✓ |
✓ |
|||
secp521 |
✓ |
- Q: Does the Nitrokey Start contain a secure chip or just a normal microcontroller?
Nitrokey Start is implemented in the microprocessor.
- Q: How large is the storage capacity?
The Nitrokey Start doesn’t contain storage capability for ordinary data (it can only store cryptographic keys and certificates).