Factory Reset Heads v2.0+¶
Λόγοι επαναφοράς στις εργοστασιακές ρυθμίσεις¶
Your Nitrokey is locked (e.g. due to multiple incorrect PIN entries)
Έχετε χάσει το Nitrokey σας (σε αυτή την περίπτωση θα χρειαστείτε πρώτα ένα νέο)
You have installed an operating system yourself (e.g. after changing the hard disk)
Το λειτουργικό σας σύστημα δεν ξεκινάει
Προειδοποίηση
All GPG keys of your Nitrokey will be deleted during this procedure.
Διαδικασία¶
Συνδέστε το Nitrokey σας στο NitroPad.
Ενεργοποιήστε το NitroPad και διακόψτε την αυτόματη εκκίνηση πατώντας οποιοδήποτε πλήκτρο.
Επιλέξτε «Επιλογές».
Επιλέξτε «OEM-Factory Reset /Re-Ownership».
Confirm reset with “Continue”.
The integrity of your setup will be tested, deppending on your reason to perform the reset this can fail continue with ok anyways
You will be prompted with:
Would you like to use default configuration option? If N, you will be prompted for each option [Y/n]:
Μπορείτε να πατήσετε enter για την προεπιλεγμένη επιλογή (Y).
Θα εμφανιστεί μια δεύτερη προτροπή:
Would you like to export your public key to an USB drive? [y/N]:
Επιλέξτε επίσης την προεπιλεγμένη επιλογή (N) πατώντας enter.
Θα χρειαστεί να αγγίξετε το Nitrokey κατά τη διάρκεια αυτής της διαδικασίας όταν σας ζητηθεί.
Τώρα εμφανίζει όλους τους κωδικούς PIN που χρησιμοποιούνται από τους επικεφαλής:
Θα τα χρειαστείτε για ορισμένες διαδικασίες, οπότε φροντίστε να τα θυμάστε.
Confirm the subsequent restart.
Μετά την επανεκκίνηση πρέπει να δημιουργηθεί το μυστικό OTP. Επιβεβαιώστε τη διαδικασία με Enter.
Enter TPM Owner Password (Default: 12345678)
Scan QR code with Phone to inport TOTP Seceret (Optional) and hit Enter
When asked touch your Nitrokey.
When prompted, enter the Secret App PIN of your Nitrokey (Default: 12345678) and hit Enter
Πατήστε enter και θα ξεκινήσει η αυτόματη εκκίνηση.
Τώρα θα πρέπει να επιλέξετε την προεπιλεγμένη εκκίνηση, να επιλέξετε την πρώτη επιλογή και να την κάνετε προεπιλεγμένη.
Θα εμφανιστεί αυτή η προτροπή:
Do you wish to add a disk encryption key to the TPM [y/N]:
Hit enter to choose the default option (N).
Please confirm that your GPG card is inserted [Y/n]:
Here also hit enter for the default option (Y).
It will ask for the Admin PIN which is by default (123456).
Η επαναφορά έχει ολοκληρωθεί και ξεκινάτε με το εγκατεστημένο λειτουργικό σας σύστημα.
Συνδέστε το Nitrokey σας στο NitroPad.
Ενεργοποιήστε το NitroPad.
Επιλέξτε «Επιλογές».
Επιλέξτε «OEM-Factory Reset /Re-Ownership».
Επιβεβαιώστε την Επαναφορά με «Συνέχεια».
Η ακεραιότητα της ρύθμισης θα ελεγχθεί, ανάλογα με το λόγο που θέλετε να εκτελέσετε την επαναφορά, αυτό μπορεί να αποτύχει, συνεχίστε με το ok ούτως ή άλλως.
Όλες οι ακόλουθες ερωτήσεις μπορούν να απαντηθούν με την Προεπιλογή. Απλά πατήστε enter αν θέλετε μόνο να επαναφέρετε τη συσκευή σας.
Would you like to change the current LUKS Disk Recovery Key passphrase? (Highly recommended if you didn't install the Operating System yourself, so that past provisioned passphrase would not permit to access content. Note that without re-encrypting disk, a backuped header could be restored to access encrypted content with old passphrase) [y/N]: N Would you like to re-encrypt LUKS encrypted container and generate new Disk Recovery key? (Highly recommended if you didn't install the operating system yourself: this would prevent any LUKS backuped header to be restored to access encrypted data) [y/N]: N The following security components will be provisioned with defaults or chosen PINs/passwords: TPM Ownership password GPG Admin PIN GPG User PIN Would you like to set a single custom password that will be provisioned to previously stated security components? [y/N]: N Would you like to set distinct PINs/passwords to be provisioned to previously stated security components? [y/N]: N Would you like to set custom user Information for the GnPG key?[y/N]: N Would you like to set custom user information for the GnuPG key? [y/N]: N Checking for USB Security Dongle... Detecting and setting boot device... Boot device set to /dev/nvme0n1p2 Resetting TPM... Resetting GPG Key... (this will take around 3 minuts...) Changing default GPG Admin PIN Changing default GPG User PIN Reading current firmware (this will take a minute or two) Adding generated key to current firmware and re-flashing... Signing boot files and generating checksums
Θα εμφανιστούν τα Default GPG PINS και ο κωδικός πρόσβασης TPM
Confirm the subsequent restart.
Μετά την επανεκκίνηση πρέπει να δημιουργηθεί το μυστικό OTP. Επιβεβαιώστε τη διαδικασία με Enter.
Εισάγετε τον κωδικό πρόσβασης TPM (προεπιλογή: 12345678)
Σαρώστε το QR COde με το τηλέφωνο για να εισαγάγετε το TOTP Seceret (προαιρετικά) και πατήστε Enter
Όταν σας ζητηθεί, πληκτρολογήστε το Admin PIN του Nitrokey σας (Προεπιλογή: 12345678) και πατήστε Enter.
Στη συνέχεια, θα πρέπει να φτάσετε στο μενού Έναρξη.
Πατήστε Enter για να ξεκινήσει η «Προεπιλεγμένη εκκίνηση».
Σημείωση
If you see the message that no default exists yet, please follow the procedure described in default boot.